Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Yountville, CA
If you’re planning a new gate in Yountville, the work starts with how the gate has to live here: hot, dry summers, wet winters, and a property that may sit on an estate lane or a narrow side street. We handle gate installation as our core trade, and we do it as specialists, not as a general contractor who adds gates to a longer list. Custom iron, redwood, and grape-stake designs are common in Yountville because they fit the valley’s rustic-luxury look, and they need to hold up to seasonal tourist traffic and irrigation spray. Call (888) 298-3409 for a free estimate.
Why Yountville Homes Are Different
Yountville is not a subdivision where every gate is the same. Housing stock runs from historic bungalows and farmhouses from the late 1800s to mid-century ranch homes and modern luxury estates, and each era built its gates differently. A property along Washington Street or one of the surrounding lanes may have a custom driveway gate that was made for that one opening, which means off-the-shelf hardware and standard brackets often won’t line up on the first try.
The climate does its own work. Hot, dry summers dry out and crack wood, while mild, wet winters swell and warp it, so a wooden gate that swings cleanly in spring can drag by August. Metal gates and hinges rust from winter rain and irrigation spray, and high-wind events coming off the nearby Vaca Mountains put real stress on gate hardware and posts. Many older properties have original redwood gates weathered by decades of sun and sprinkler overspray, and we often find posts rotted at the base, where the sprinklers hit them. Matching that old-growth redwood or finding a clean modern substitute takes judgment, not a catalog order.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Yountville Services
Most homeowners in Yountville call us about a gate that’s stopped working or a new one they want built right the first time. Here’s how each of those goes in this town.
Gate Repair in Yountville
Repair in Yountville usually starts at the post and the hinge, because that’s where this climate attacks a gate first. Wood gates swell and rack out of square through the wet season, then dry and crack, and a rotted post at the base lets the whole panel sag. We diagnose the full system, from the operator board down to the hinge pin, and we work on the brand you already own rather than pushing a replacement. For a gate that needs hardware or panel work, see Gate Repair in Yountville.
Electric Gate Repair in Yountville
An electric gate on a Yountville property fails for reasons that are often electrical, not mechanical. A control board, a loop detector, intercom wiring, or a motor drive can all be the culprit, and guessing wrong is expensive. Our technicians are trained on automated systems and treat electric work as a specialty, so the diagnosis covers the operator and its safety devices, not just the arm that won’t move. We answer 24/7 if your gate is stuck open or won’t respond; see Electric Gate Repair in Yountville.
Gate Installation in Yountville
Installing a gate in Yountville means designing for a specific property and a specific climate, not dropping in a standard kit. Many of the town’s estate vineyards, boutique wineries, and luxury homes along Washington Street and the surrounding lanes sit behind custom gates that are ornamental as much as functional, often in iron, redwood, or grape-stake styles that fit the valley. From the operator board to the hinge pin, we build the whole gate and match the hardware to the property. Because our work is gate installation and installation alone, we’re not learning your opening on the job.
Automatic Gate Installation
An automatic gate brings a motor, a control board, and safety devices into a property that may never have had power at the opening before. On Yountville estates, the goal is a gate that looks hand-built and moves like a machine, so we plan the operator and the leaf together.
Signs you need it
You’re building a new entrance, or you’re tired of getting out in the weather every time a visitor or a delivery arrives.
What it costs in Yountville
Automatic gate installation here typically runs $3,500 to $9,000, depending on the gate material and the operator you choose; the written estimate sets the final price.
How we do it
We measure the opening and the swing or slide path, set posts to proper footing depth, mount the operator and its safety devices, then test the full cycle and controls before we hand it over.
Driveway Gate Installation
A driveway gate is where Yountville’s seasonal traffic shows up. Tourist vehicles, deliveries, and irrigation runoff all press on the same entrance, so a driveway gate has to be built heavier than a garden gate and swung or slid on hardware that tolerates a lot of use.
Signs you need it
Your old driveway gate sags, drags, or has a post that shifted, or you want to close off an entrance that’s been open to the street.
What it costs in Yountville
Driveway gate installation typically ranges from $2,200 to $7,500 for the gate and its hardware; the written estimate sets the final price.
How we do it
We set the posts, hang the leaf square and level, mount the latches and stops, and check that it clears the ground and the street through its whole travel.
Sliding Gate Installation
A sliding gate makes sense where a swing would block a narrow drive or crowd a planted edge, and that’s common on the tighter lanes in Yountville. It has to ride straight or it will bind, so the track and the footing get as much attention as the panel.
Signs you need it
You have a slope or a tight entrance where a swing gate won’t clear, or you want a gate that opens without sweeping into the drive.
What it costs in Yountville
Sliding gate installation typically runs $3,000 to $8,500, with the final number set by the written estimate.
How we do it
We set a level track and footing, mount the carriage and rollers, hang the panel to clear the ground the whole way, and test the stops at both ends.
What Gate Installation Costs in Yountville
| Item | Typical range in Yountville |
|---|---|
| Driveway gate installation (gate and hardware) | $2,200 – $7,500 |
| Sliding gate installation | $3,000 – $8,500 |
| Automatic gate installation (with operator) | $3,500 – $9,000 |
An automatic gate and a custom ornamental design are the two things that move the number most in Yountville, since iron, redwood, and grape-stake styles cost more than a plain panel. We measure the opening, quote the job in writing, and agree the price before any work starts.
Does gate installation in Yountville need a permit?
Most cities require a permit for a gate and any operator, so ask the Town of Yountville’s building department before work begins. We’ll give you the measurements you need for the application.
Can you match a gate to an older Yountville property?
Yes. Historic bungalows and farmhouses here often have custom redwood or iron gates, and we match the design and the hardware rather than forcing a standard panel onto an older opening.
Brands We Service in Yountville
We work on the brand you already own. Our technicians are familiar with LiftMaster, Elite, FAAC, and Mighty Mule, from residential openers to heavier operators, and we diagnose the system in front of us instead of steering you toward a brand. Turnaround depends on the part and the system. See our brands.
Pricing for Gate Company in Yountville, CA
| Service | Typical range in Yountville |
|---|---|
| Driveway gate installation (gate and hardware) | $2,200 – $7,500 |
| Sliding gate installation | $3,000 – $8,500 |
| Automatic gate installation (with operator) | $3,500 – $9,000 |
In Yountville, a custom ornamental gate in iron or redwood and the operator you choose are what push the price up, along with any post work on a property where the old footing has rotted. We agree the price in writing before any work starts, so the invoice matches the quote.
See the difference
Before
After
Before
After
Before
AfterNeighborhoods We Serve in Yountville
We work across Yountville and the lanes that feed it, including the 94599 properties and the estates and winery entrances around town. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday, with same-day service where the day allows.
- Washington Street and the surrounding lanes
- Yountville’s estate vineyards and boutique winery entrances
- Historic side-street bungalows and farmhouses
- Mid-century ranch homes and modern luxury estates
Service Area – Cities Near Yountville
Yountville sits in the middle of the valley, and we cover the towns around it as well. If you’re just up the road in Fetters Hot Springs-Agua Caliente, CA or down in El Verano, CA, we can get to you. We also work in Angwin, CA and Penngrove, CA, and on the home base page for Gate Repair Santa Rosa. Call and tell us where the gate is.
Serving Yountville, CA – Our Local Coverage Area
We serve Yountville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Yountville
We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday, with same-day service when the day allows. Repair calls in Yountville are usually reached quickly; a new installation is measured and scheduled. Call (888) 298-3409 for a free estimate.
Ask the Town of Yountville’s building department, since most cities require a permit for a gate and any operator. We’ll supply the opening measurements and details your application needs, and we can work with the operator wiring and safety edges you plan to install.
Yes. We cover Yountville and the surrounding towns, including the estate lanes and winery entrances around the 94599 ZIP. If your property is on the edge of town or just outside it, call and we’ll confirm coverage before we schedule.
Contact
Whether it’s a new automatic gate, a sliding gate that needs a proper track, or a driveway gate to match an older Yountville property, we diagnose before we recommend anything and quote the price in writing before any work starts. Call (888) 298-3409 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 14 years of experience.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Yountville Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, swapped it, and we were moving cars again in under an hour."
- Kurt Novak"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Christine Kim"Repair is holding. He was quite a bit later than the window I was given, and nobody called me about it, I had to call them. The work itself was done well once he got here."
- Jeff Rhodes