Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Santa Rosa
A gate that won’t open is a problem you need solved today. We handle gate repair, electric gate repair, and new gate installation for homeowners and property managers across Santa Rosa, from the acreage entrances off Calistoga Road to the tight driveways of the West End. This city throws a lot at a gate: hot, dry summers, clay soil that moves, and a housing stock that runs from 1900s Victorians to post-fire rebuilds. We know which problems belong to which neighborhood. Call (888) 298-3409 for a free estimate and a straight diagnosis.
Why Santa Rosa Homeowners Call Gate Repair Santa Rosa for Gate Repair
Gates are all we do. Every technician on every job is a gate specialist, not a generalist working through a punch list. That single-trade focus is why property managers in Rincon Valley and Bennett Valley keep our number: we diagnose the operator board, the loop detector, the hinge post, and the latch on the same visit, because we know where the failure usually hides.
We work on the brand you already own. LiftMaster, FAAC, BFT, Linear, and others are familiar systems to us, and the answer is repair, not a sales pitch for a replacement. We hold a strong local reputation built on honest diagnostics and clear written estimates.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is available across Santa Rosa when the schedule allows, and for an urgent failure we move it to the front. You get a written price before any work starts, so no invoice surprises after the fact. Our technicians have up to 14 years of experience.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wrought Iron Gate Repair in Santa Rosa
Wrought Iron Gate Repair in Santa Rosa usually starts with a sagging hinge or a corroded latch, and the fix runs $200 to $550 for most swing gates. Iron gates don’t rot, but they do crack at welds, seize at hinges, and lose alignment when the post behind them shifts. On older properties near Railroad Square, we often find original iron work mounted on concrete footings that have moved after decades of clay-soil movement. When rust has eaten into a picket or a hinge bracket, we cut out the damaged section, weld in new steel, and finish it so the repair holds.
Weld and rust work
Ash grit and dry heat work on exposed joints over time, and a compromised weld is a structural problem, not a cosmetic one. We re-weld hinge brackets, gussets, and picket connections, then treat rust before it spreads to the frame. Heavy panels that take the load of a repair should always be handled by a trained technician.
Hinge and latch alignment
A gate that swings hard or won’t catch is usually telling you the alignment is off, not that the latch is broken. We check the post, the hinge pins, and the panel square together and correct the source.
Metal Gate Repair in Santa Rosa
Metal Gate Repair in Santa Rosa covers the rebuild-era aluminum and vinyl gates scattered through Fountaingrove and Coffey Park, plus the steel driveway gates on older properties. Many of these were hung quickly during the rebuild years on contractor-grade posts that were never re-set after the fire’s soil disturbance, so the panel sags or racks against the stop even though it looks new. Correcting one of these installs typically runs $250 to $600. That work is about resetting the post, squaring the frame, and re-hanging the gate so the hardware stops taking the load alone.
Realigning a racked panel
Once a post settles, the operator and the track both pay for it. We correct the sag at the source, then re-level the rack and pinion so the gate runs true instead of straining the motor.
Post reset and footing repair
Clay-heavy soil here heaves and cracks in the dry season, which is where most sagging gates start. We reset or re-pour the footing at the proper depth and anchor the post back into solid ground.
Trusted Brands We Service in Santa Rosa
We’re familiar with the systems already on Santa Rosa gates: LiftMaster and Linear on the residential side, FAAC and BFT on heavier residential and acreage operators, plus Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule when that’s what you own. We diagnose the system you have rather than pushing a brand we prefer to install. No parts stock and no warehouse claims here, just working knowledge of these boards, motors, photocells, and loop detectors, and a fast turnaround on getting the right replacement part when one is needed.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Santa Rosa Homes
- Rebuild-era gates that drag or rack. In Fountaingrove and Coffey Park, gates installed after the fires were often hung on posts never re-set after the soil disturbance, so the panel sags within a few years. The hardware looks fine, but the post is the problem.
- Solar openers stalling on long rural driveways. Acreage gates off the rural roads often run on solar because pulling mains power to the gate isn’t practical. When the panel or battery can’t keep up, a heavy swing or slide gate stalls mid-cycle and racks against its stops.
- Dry-season clay-soil heave. Santa Rosa’s hot, dry summers and clay-heavy soil crack and heave footings and hinge posts. That’s the seasonal cycle most gate failures trace back to.
- Wet-season wood swell. Winter rain swells redwood and cedar gates so they bind against the latch or scrape the ground. A latch and hinge adjustment handles most of these, but the post is worth checking too.
Pricing for Gate Repair in Santa Rosa, CA
A typical hinge and latch adjustment in Santa Rosa runs $150 to $350, and a post reset or footing repair runs $300 to $900 depending on access and soil. Wrought iron weld and repair work runs $200 to $550. Electric gate repair, which means control board, motor drive, safety sensor, or loop detector work, typically runs $250 to $800 for the repair itself. Solar opener service and battery or panel replacement add to that range. What shifts the number is access, whether the footing has to be re-poured, and what parts the specific system needs. The estimate is free, the price is set per job by a written estimate that you agree to before any work starts, and the written estimate is the final word.
We Also Serve Cities Near Santa Rosa
We cover the communities around Santa Rosa as well, including Larkfield-Wikiup, the area around Sonoma State University, Rohnert Park, and Penngrove. The rural and acreage entrances northwest toward Larkfield and the long driveways out toward Penngrove get the same solar-operator and footing work we do in Santa Rosa. If your gate sits at the edge of town, we’ll still come out and take a look. For the full picture of what we handle, see our gate repair services. Call (888) 298-3409 to book a free estimate.
Serving Santa Rosa, CA – Our Local Coverage Area
We serve Santa Rosa and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Santa Rosa
Rebuild-era gates in Fountaingrove and Coffey Park were often hung on posts that were never re-set after the fire’s soil disturbance, so the panel sags or racks within a few years even though the hardware looks new. Correcting it means resetting the post and re-leveling the gate, not just adjusting the hardware. Call (888) 298-3409 for a free estimate.
A solar operator stalls when the panel or battery can’t keep up with a heavy gate, but the real failure is often below grade, where clay soil has heaved or cracked the hinge post so the panel sags and racks against its stops. We reset the footing, correct the sag, then verify the safety photocell and loop detector before calling it fixed. Call (888) 298-3409 for an estimate.
An automatic gate in Santa Rosa should have working safety photocells and, on slide gates, a loop detector that stops the gate if something is in its path. These are the parts that protect people and vehicles, so we test them on every electric gate repair, not just when we replace a board. Call (888) 298-3409 if you’re unsure whether yours are working.
Winter rain swells redwood and cedar gates, so a gate that swings freely in the dry season binds against the latch or scrapes the ground once it’s wet. A latch and hinge adjustment usually solves the binding, and checking the post at the same time tells you whether the alignment is drifting. Call (888) 298-3409 for a free estimate.
They can. Cal Fire defensible-space rules often dictate gate placement and clearance on acreage properties, and homeowners aren’t always aware of the limits when a gate goes in. We can check what’s practical on your entrance before any work starts. Call (888) 298-3409 to set up a free estimate.
If your gate is dragging, stalling, or won’t open at all, call Gate Repair Santa Rosa at (888) 298-3409 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We work on the brand you already own, from the operator board to the hinge pin, and one call covers the whole gate.
Written by the team at Gate Repair Santa Rosa.